|
Aero Class Table
|
Display general information about the available Aero Classes. | Setting | Description |
|---|
| Group, Aero |
Group and name of Aero Class |
| RefCS: |
Cross section related to the Aero Class for calculation with CFD module |
| Data, Sym |
Type of data and flag indicating if coefficients for - directions can be deduced from those of + directions
- Single Values: Only one coefficient and derivate is given per main direction
- Table: Several values can be given for each main direction
|
| FactorX, FactorY, FactorZ |
Additional factors for steady state coefficients |
| DragX, FIDx |
Drag coefficient for longitudinal wind and normalization length |
|
|
Buttons
|
|
|
Flutter Coefficient Table - Angles and Values
|
Display and modify flutter coefficients of selected Aero Class. The left table shows the available directions and the right table the coefficients for the selected direction.
| Setting | Description |
|---|
| Direction, Angle |
Main direction and angle of table entry |
| Recalc |
Indicates if the line will be recalculated when calling the next Action>Aero Note: The recalculation state can be changed by pressing the <C> key
|
| Frequency |
Reduced velocity U/fB of table entry with according normalization length B |
| Amplitude |
Amplitude of forced oscillation for CFD calculation Default: 0 for automatic selection
|
| P1-4, H1-4, A1-4 |
Dimensionless flutter coefficients for sway, heave and twist |
|
|
Buttons
|
|
